Product Introduction
Water is shot from the nozzle outlet by pressure, and the peak of the “cone” underneath spreads water into a 180° (flat) circular moist that covers 1000mm in diameter of the same surface level. There is 80% of water steam and 20% of water droplets are produced within the 1000mm circular moist. The smaller the volume of each water droplet is, the easier for air to convey the watery content into the workshop through the force from the ventilator, and the higher humidity level is reached compared to larger water droplets with the same amount of water was used. Each one-arm targeted nozzle turns water into the smallest water pieces mixed with air but can moisturize a larger range of space, thus less nozzle would be needed to accomplish the same humidity level you need. In other words, assembling one-arm targeted nozzles reduces the total number of nozzles you need to complete the same task while reducing the water bills it has cost you.
Water is shot from the nozzle outlet by pressure, and the peak of the “cone” underneath spreads water into a 180° (flat) circular moist that covers 1000mm in diameter of the same surface level. There is 80% of water steam and 20% of water droplets are produced within the 1000mm circular moist. The smaller the volume of each water droplet is, the easier for air to convey the watery content into the workshop through the force from the ventilator, and the higher humidity level is reached compared to larger water droplets with the same amount of water was used. Each one-arm targeted nozzle turns water into the smallest water pieces mixed with air but can moisturize a larger range of space, thus less nozzle would be needed to accomplish the same humidity level you need. In other words, assembling one-arm targeted nozzles reduces the total number of nozzles you need to complete the same task while reducing the water bills it has cost you.
Product Display
The third-generation nozzle is one of the vital elements in saving water and electricity, plus combining the nozzle with the force of ventilation system would amplify the work by 90% by its secondary impact, while 96% of pump frequency conversion power is able to reduced by 3kw to 5kw to make the requirements of humidity. Solve the problems of difficult humidification and high energy consumption in spinning and weaving workshops, high customization, fast humidification, no blind spots, easy to clean and not easy get stains on.
👇🏿👇🏾👇🏼Click here to visually see its performance
Smaller Droplet Moises Larger – Hebei Oasis Machinery Equipment Co., Ltd. (heboasis.com)
